Foliant 400

LRLmain.gif (4561 bytes)

foliant400.gif (4066 bytes)

The basic class of On Demand Foliant laminating machines is based on the simple Foliant 400T laminator with working speed up to 7 metres per minute. The machine is also available as FOLIANT 400S semi-automatic line with a separator. Third machine is FOLIANT 400A fully automatic line with maximum speed up to 12 metres per minute. All these machine varieties are suitable for laminating offset printed B3 size sheets or laminating printouts from digital printing machines (Indigo, Nexpress, KBA etc). The maximum size of the laminated sheet can reach up to 380 x 580 mm.

1. The Manual Machine
We can offer FOLIANT 400T laminating machine, designed with manual feeding and with manual separation of the

laminated sheets. Feeding utilises a feeding table withtransport belts and separation uses a film perforating wheel, the machine is easy to operate and in case of standard job orders would allow a maximum operating capacity of up to 840 pieces of B3 size sheets per hour. Laminating unit FOLIANT 400T can be supplied with a MS400 Modular Stand. The machine requires a minimum floor space of 74 x 117 cm.

2. The Semiautomatic Laminating Line
The same machine could be delivered as FOLIANT 400S semi-automatic laminating line, designed with manual feeding, but equipped with an automatic separator for the laminated sheets. The maximum operating capacity is again 840 pieces of B3 size sheets per hour. The automatic separator splits the individual sheets and delivers them into the reception unit. This machine is supplied with a modular stand and with a reception unit for storage of laminated sheets as standard. The machine requires a minimum floor space of 74 x 220 cm.

3. The Fully Automatic Laminating Line
Productive model FOLIANT 400A is a fully automatic laminating line with an automatic feeder and sheets separator. The automaic sheet feeder increasese the machine´s output up to maximum of 1400 B3 sheets per hour, and it is equipped with a deep pile feeder designed to accommodate a supply of paper up to 15 cm high. The fully automatic machine FOLIANT 400A is supplied with a modular stand and with a reception unit for storage of laminated sheets as standard. The machine requires a minimum floor space of 74 x 280 cm.

Specifications of single sided laminating machines FOLIANT
Class >FOLIANT 400< (Standard) Maximum papersheet size 380 x 580 mm

	FOLIANT 400T	FOLIANT 400S	FOLIANT 400A
Feeding	Manual	Manual	Automatic
Separation	Manual	Automatic	Automatic
Paper (thickness in gsm)	115 - 350	115 - 350	115 - 350
Feeder´s load capacity	-	-	-
Laminating roller surface	Chrome	Chrome	Silicone
Main rollers pressure system	Coil springs	Coil springs	Coil springs
Suitable for format	B3, B4	B3, B4	B3, B4
Max. working width	380 mm	380 mm	380 mm
Speed control*	0 - 7 m/ min	0 - 7 m/ min	0 - 12 m/min
Max.performance/hour*	850 sheets B3/h	850 sheets B3/h	0 - 12 m/min
Temperature control	80 - 140°C	80 - 140°C	80 - 140°C
Power supply	220-230V, 50-60Hz	220-230V, 50-60Hz	220-230V, 50-60Hz
Power	950 W	1265 W	1500 W
Measures (mm)	700 x 1170 x 800	740 x 2200 x 1400	740 x 2800 x 1400
Weight	75 kg	120 kg	180 kg
Minimum papersize	250 x 353 mm	250 x 353 mm	250 x 353 mm
Maximum papersize	370 x 580 mm	380 x 580 mm	380 x 580 mm
Modular Stand	Optional	Included	Included
Reception Unit	-	Included	Included
* Maximum speed and max. performance are given for automatic feeding and for the white paper 135 gsm only For the manual feeding and for the paper of higher thickness are both values lower

Lee Ryder Lamination

[Top of Page][Main Page][Email][Foliant Series™][Click here to see our Roll Laminating Films][En_Español]